| Customization: | Available |
|---|---|
| Certification: | ISO9001 |
| Installation: | Sitting Type |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Glass-Fused-to-Steel is two materials - Enamel glaze and steel plate surface are fused together after heat treatment at 850-940ºC and then create a tough and inert bond, which combines the strength of steel with the outstanding chemical and physical corrosion resistance of glass. Then it is easy to install , dismantled, removed and relocated,Glass-Fused-To-Steel tank is assembled by Glass-Fused-To-Steel plate and fixed by self - locking bolt. Then the sealing glue is applied to the joint gap and bolt position to improve airtightness of the tank. Also tank's color can be customized and the service life is more than 30 years with a lower maintenance,
All our GLS Irrigation Water tanks are manufactured with AWWA D103-09, API 650, OSHA, ISO 28765, NSF/ANSI 61, NFPA and other international standards.
GLS Irrigation Water tanks are typically filled from rainwater harvesting, existing water sources such as wells, springs, municipal lines or even trucks, and then stored indefinitely until reserve capacity is required.
Using a GLS Irrigation Water tank to store water on-site allows your irrigation system to pump at a faster rate than your main water supply, increasing irrigation efficiency. Another benefit of installing a water tank is that you can rest assured that your irrigation will not be interrupted if there is a problem with the tap water supply.
Glass Fused-To-Steel Water Storage Tanks Specifications
| Coating color | Dark blue, Dark green , White, and customized |
| A standard steel plate size | effective size 2400mm x 1200 m |
| Steel plates thickness | 3mm - 12mm , depends on the diameter & height |
| Coating thickness | 0.25mm - 0.4mm, two coating internal and external |
| Acid and alkalinity proof | standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 |
| Adhesion | 3,450N/cm |
| Elastic | same as steel sheet , around 500KN/mm |
| Hardness | 6.0 Mohs |
| Service life | >30 years |
| Spark/Holiday test | >1500 V |
| Permeability | gas and liquid impermeable |
| Easy yo clean | smooth, glossy, inert, anti-adhesion |
| Corrosion resistance |
excellent ! Suitable for waste water salt water, sea water, high sulfur crude oil, salt fox, organic and inorganic compounds |
){kind=link}