| Customization: | Available |
|---|---|
| Certification: | ISO9001 |
| Wall Thickness: | 3mm - 12mm , Depends on The Diameter & Height |
|
Still deciding? Get samples of US$ 50/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
What is Glass fused to steel tanks?
GFS bolted tank is made of glass fused to steel plate, special sealing material, self-locking screw and other materials. The thickness of enamel steel plate can reach to 20 mm, the most used steel plate thickness is 3~10 mm, steel plate has surface oil, contain rust, contain oxide skin, after shot blasting, sand and other pretreatment process, the steel plate surface will be clean. After 900 ºChigh temperature second enamelingl in electric furnace ,0.3 mm enamel coating is applied on both sides of steel plate. strong binding force between enamel coating and steel plate. Enamel coating can not only prevent tank corrosion, but also has the function of strong acid and alkali resistance. And has extremely strong wear resistance.
Glass-fused-to-steel Tank refer to glass-lined storage tanks, also known as some GFS storage tanks.
Glass is melted with steel to enhance its performance.
Fusion is important because it is single steel, and it is the same for the environment.
When the fusion of steel and glass is completed, the strength increases and the wear resistance decreases, as does the suitable pH value scaffold for alkaline solution.
Such ponds are generally considered to be one of the important components of environmental technologies, such as anaerobic digestion tanks, wastewater treatment and fireproof storage.
They are industrial water storage tanks.
The glass fused on the stainless steel tank panel is coated with glass enamel inside and outside.
The enamel has a strong, bright, smooth silicate coating.
GFS tank has very good anti-corrosion performance, extremely strong acid and alkali resistance, PH1-14 applicable, beautiful and elegant appearance, convenient for later maintenance. It is widely used in biogas engineering, biomass natural gas engineering, animal husbandry sewage, industrial wastewater, etc. It is suitable for each treatment process such as CSTR, USR, UASB, A/O, integrated device, etc.
Comparison of GFSTank and other tanks
| Item | Concrete Tank | Carbon steel tank | GFS Tanks | LIPP tank |
| Beautiful degree | Low | Low | High | High |
| Temperature adaption | A stress | Adapt to low temperature | Adapt to low temperature | Adapt to low temperature |
| Shape | Any shape | Round shape | Round shape | Round shape |
| Ground Or underground | Both | Ground | Both | Ground |
| Corrosion resistance | Normal | No resistance to corrosion | Good | Not |
| Abrasion resistance | Good | Bad | Good | Bad |
| Easy to clean | Bad | Bad | Good | Normal |
| Easy to repair | Normal | Good | Good | Bad |
| Weight (T) | Heavy | Little heavy | Light | Little light |
| Tank cost | Middle | High | Low | Low |
| Tank temperature protect | No | Need | Need | Need |
| Anti-corrosive Treatment | No | Need | No | Need |
| Annual anti-corrosive cost | No | High cost | No | High cost |
| Corrosion resistance | Normal | No | Superior | Normal |
| Abrasion resistance | Good | Bad | Good | Bad |
| Service life | 30 | 10 | 30 | 25 |
Roofs option:
1.Glass-Fused-to-Steel-Roof
air-tightness,often utilized for pressurized structures and provide a suitableoption for odour control
cone shape roof with external / internal beams
viable solution for demanding applications
2. Aluminum Alloy Trough Deck Roof
. economical option for potable water, waste water, and firewater storage etc.
. keep out rain and wind, odour control
.without air-tightness
3. Aluminum Geodesic Dome Roof
self-support without support columns
without air-tightness4. Double Membrane Roof
superior option for anaerobic digestion processes andbiogas applications
air tightness, utilized for biogas collection and odour control
integrated AD tank with the cover on top, cost effective
About our factory
){kind=link}