| Certification: | ISO9001 |
|---|---|
| Wall Thickness: | 3mm - 12mm, Depends on The Diameter & Height |
| Installation: | Sitting Type |
| Material: | Enamel Steel Plate |
| Type: | Water Storage |
| Service Life: | >30 Years |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier GFS bolted tank is made of glass fused to steel plate, special sealing material, self-locking screw and other materials. The thickness of enamel steel plate can reach to 20 mm, the most used steel plate thickness is 3~10 mm, steel plate has surface oil, contain rust, contain oxide skin, after shot blasting, sand and other pretreatment process, the steel plate surface will be clean. After 900 ºChigh temperature second enamelingl in electric furnace ,0.3 mm enamel coating is applied on both sides of steel plate. strong binding force between enamel coating and steel plate. Enamel coating can not only prevent tank corrosion, but also has the function of strong acid and alkali resistance. And has extremely strong wear resistance.
AWWA D103-09 Design Standard Bolted Steel Potable Water Storage Tanks
Our bolted steel potable water storage tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our bolted steel tank engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. The steel round (cylindrical) shell of the tank is built from two-layer enameled sheets coated on both sides. The sheets are attached with special high-grade bolts and sealed by constantly flexible silicone (sealant). The surface of connecting material and the shell itself are properly treated. It has been recognized that glass fused tank as an excellent tank for water and wastewater treatment
Bolted potable water tanks are made Glass-Fused-to-Steel that are manufactured and finished offsite, greatly reducing the time and labor involved in the field. Once delivered, each section is erected, sealed with gaskets and bolted to adjacent sections. This results in an installation process that is quick and easy, far faster than installation of concrete or welded tanks, and it is not subject to the weather delays that often stall the installation of competing designs.
NSF 61 Approved Glass Fused to Steel Potable Water Storage Tanks
Our glass fused to steel potable waterstorage tank is NSF approved. The steel round (cylindrical) shell of the tank is built from two-layer enameled sheets coated on both sides. The sheets are attached with special high-grade bolts and sealed by constantly flexible silicone (sealant). The surface of connecting material and the shell itself are properly treated. It has been recognized that glass fused tank as an excellent tank for water and wastewater treatment
Glass fused to steel Tanks are used in commercial and industrial applications for a wide variety of uses ranging from water and chemical storage to food applications and dry bulk storage silos. Standard capacities range from 20m3 to 20000m3.
Compared with concrete or carbon steel welded tanks, the GFS tank has unmatched expandability. If it is necessary to expand the tank capacity in the future, the GFS tank can be easily expanded with minimal material and labor input. Since the Glass-Fused-to-Steel bolted tanks are constructed of modular enamel steel, only more enamel steel is needed and the time to reconfigure and expand existing tanks is required.
The surface of Glass-Fused-to-Steel bolted tanks is smooth and sleek, the standard color is dark blue, bright and beautiful, and any other colors can be customized according to the user's requirements.
Glass Fused-To-Steel Water Storage Tanks Specifications
| Coating color | Dark blue, Dark green , White, and customized |
| A standard steel plate size | effective size 2400mm x 1200 m |
| Steel plates thickness | 3mm - 12mm , depends on the diameter & height |
| Coating thickness | 0.25mm - 0.4mm, two coating internal and external |
| Acid and alkalinity proof | standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 |
| Adhesion | 3,450N/cm |
| Elastic | same as steel sheet , around 500KN/mm |
| Hardness | 6.0 Mohs |
| Service life | >30 years |
| Spark/Holiday test | >1500 V |
| Permeability | gas and liquid impermeable |
| Easy yo clean | smooth, glossy, inert, anti-adhesion |
| Corrosion resistance |
excellent ! Suitable for waste water salt water, sea water, high sulfur crude oil, salt fox, organic and inorganic compounds |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}